A page from the OpenDepot.org service

Jump to the start of the main contents

Ibrahim, R. and Omar, M.A. and Goh, W.C. and Mohamad, M. and Muhamad, S. and Yahya, N. A. and Radzi, Z. and Abu Kasim, N.H. (2007) Fabrication of 316L stainless steel parts by injection moulding for biomedical application using a novel binder. In: 3rd Kuala Lumpur International Conference on Biomedical Engineering 2006, Kuala Lumpur.

[img]
Preview
PDF
Download (43Kb) | Preview

    Abstract

    This paper focuses on the usage of a novel binder system base on palm oil product to produce sintered parts of stainless steel 316L produced by vertical injection molding technique for biomedical application. The stainless steel 316L powder was mixed using z-blade mixer with the thermoplastic binder system comprising of polyethylene, paraffin wax, stearic acid and palm stearin which was derived from palm oil at different volume percent (%). The feedstock then was studied in term of viscosity and shear rate using capillary rheometer. The feedstock was molded using vertical injection molding machine. After molding, the green molded part was immersed into the solvent to extract part of the binder system followed by sintering under vacuum atmosphere at the temperature of 1360 degrees C. The physical and mechanical properties of the sintered part such as density, hardness, shrinkage, ultimate tensile strength and elongation were measured. Biocompatibility study of in vitro test using cell osteosarcoma MG-63 was observed and discussed.

    Item Type: Conference or Workshop Item (Lecture)
    Additional Information: Associate Prof. Dr. Noor Hayaty Binti Abu Kasim Department of Conservative Dentistry, Faculty of Dentistry, University of Malaya, 50603 Kuala Lumpur, MALAYSIA
    Uncontrolled Keywords: binder system; palm stearin; stainless steel; 316L; injection molding; SELF-REPAIR; CULTURE-CONDITIONS; COMPOSITE RESIN; DENTAL PULP STEM CELL; FUNCTIONALLY GRADED DESIGN; MULTI LAYERED POST; FUNCTIONALLY GRADED DENTAL POST; SOFT SKILLS; CLINICAL PAIRING; DENTAL PULP STROMAL CELLS; LONG-TERM EXPANSION; ROLLING BALL; BALL MILL;
    Subjects: Medicine and Dentistry
    Medicine and Dentistry > Clinical Dentistry
    Divisions: UNSPECIFIED
    Depositing User: Associate Prof. Dr. Noor Hayaty Abu Kasim
    Date Deposited: 13 Feb 2012 07:05
    Last Modified: 13 Feb 2012 07:05
    URI: http://opendepot.org/id/eprint/738

    Actions (login required)

    View Item